Tile Joint Filler Bag mahgoub 5 kg light grey

futures Non-shrinkage and weather resistant. Natural solid colours. Easy to clean and not prone to cracking. Specifications: A dry, pre-mixed cement material to which water is added before use. The material is used as a watering can for ceramic, tile and marble joints (for floors and walls). Watering can be obtained in white and also in several attractive colors according to the color chart. How to use on the second day and daily for 2 days: Add watering material bag content 5 kg) to approximately 1.65 liters of water, according to the required consistency, the thickness of the arum, and the air temperature, as the water percentage decreases with the increase in the thickness and the water percentage increases with the increase in the air temperature. Stir well to obtain a homogeneous mixture, then leave for a minute, then stir again. Spread the material over the ceramics, using a rubber knife, making sure that the joints are well filled. The excess is cleaned using a wet sponge, before reaching the initial doubt time for the watering material. Then use a clean cloth dampened with water and wrung out to clean the ceramic surface without affecting the joints. It is preferable to spray water on the joints for 3 days to get the best results.